Dry Tech Aerogels AeroStor
Safety Data Sheet
According to Regulation (EC) No. 1907/2006 (REACH)
| Product identifier |
| 1.1. |
| SECTION 1: Identification of the substance/mixture and of the company/undertaking |
Date of issue: 6/14/2017 Revision date: 6/14/2017 Supersedes: 3/5/2015 Version: 3.00
Product form : Powder/Granules
Trade name : Nan02
Relevant identified uses of the substance or mixture and uses advised against
- Relevant identified uses
Use of the substance/mixture : Coating/casting/etc
1.2.2. Uses advised against
No additional information available
| 1.3. Details of the supplier of the safety data sheet |
Supplier
Dry Tech Aerogels (Pty) Ltd 11 Delfos Blvd, NW 7,
Vanderbijlpark, 1911 South Africa
Email competent person
willie@dry-tech.co.za
| 1.4. Emergency telephone number |
Emergency number : South Africa +27825862811 Information in English language
| Classification of the substance or mixture |
| 2.1. |
| SECTION 2: Hazards identification |
Classification according to Regulation (EC) No. 1272/2008 [CLP]
Not classified
Adverse physicochemical, human health and environmental effects
To our knowledge, this product does not present any particular risk, provided it is handled in accordance with good occupational hygiene and safety practice.
2.2. Label elements
Labelling according to Regulation (EC) No. 1272/2008 [CLP]
No labelling applicable
| 2.3. Other hazards |
No additional information available
| Substances |
| 3.1. |
| SECTION 3: Composition/information on ingredients |
Not applicable
| 3.2. Mixtures |
Comments : Preparation of modified hybrid materials in aqueous solution for nano bubble creation. This powder does not contain any substances to be mentioned according to the criteria of section 3.2 of REACH annex II
| Description of first aid measures |
| 4.1. |
First-aid measures general : In all cases of doubt, or when symptoms persist, seek medical attention. First-aid measures after inhalation : Remove person to fresh air and keep comfortable for breathing.
| SECTION 4: First aid measures |
First-aid measures after skin contact : Wash skin with plenty of water.
First-aid measures after eye contact : Rinse eyes with water as a precaution. If symptoms persist, call a physician.
First-aid measures after ingestion : Call a Poison Center or a doctor if you feel unwell. Rinse mouth out with water. Spit. Drink
plenty of water. Do not induce vomiting. Vomiting: prevent asphyxia/aspiration pneumonia.
6/14/2017 GB – en 1/6
| 4.2. Most important symptoms and effects, both acute and delayed |
| Extinguishing media |
| 5.1. |
| SECTION 5: Firefighting measures |
| 4.3. Indication of any immediate medical attention and special treatment needed |
No additional information available Treat symptomatically.
Suitable extinguishing media : Use firefighting measures suiting the environment.
Unsuitable extinguishing media : No information available.
| 5.2. Special hazards arising from the substance or mixture |
No hazardous decomposition products in case of fire
: No toxic fumes may be released. Non Flammable.
| 5.3. Advice for firefighters |
Protection during firefighting : Do not attempt to take action without suitable protective equipment. Self-contained breathing apparatus. Complete protective clothing.
Other information : Do not allow run-off from firefighting to enter drains or water courses. Disposal must be done according to official regulations.
| Personal precautions, protective equipment and emergency procedures |
| 6.1. |
| SECTION 6: Accidental release measures |
General measures : Wear breathing apparatus if exposed to vapors/dusts/aerosols.
6.1.1. For non-emergency personnel
Emergency procedures : Ventilate spillage area.
6.1.2. For emergency responders
Protective equipment : Do not attempt to take action without suitable protective equipment. For further information refer to section 8: “Exposure controls/personal protection”.
| 6.2. Environmental precautions |
Avoid sub-soil penetration. Prevent entry to sewers and public waters.
| 6.3. Methods and material for containment and cleaning up |
Methods for cleaning up : Take up liquid spill into absorbent material. Take up mechanically (sweeping, shoveling) and collect in suitable container for disposal.
Other information : Disposal must be done according to official regulations.
| 6.4. Reference to other sections |
Information for safe handling. See section 7. Concerning personal protective equipment to use, see section 8. For further information refer to section 13.
| Precautions for safe handling |
| 7.1. |
| SECTION 7: Handling and storage |
Precautions for safe handling : Ensure good ventilation of the work station. Wear personal protective equipment. Avoid
Dust building. Avoid contact with skin and eyes. Wear eye and breath protection.
Hygiene measures : Do not eat, drink or smoke when using this product. Always wash hands after handling the product.
| 7.2. Conditions for safe storage, including any incompatibilities |
Storage conditions : Store in a well-ventilated place. Keep cool.
Information about storage in one common storage facility
: Keep away from food, drink and animal feeding stuffs.
| 7.3. Specific end use(s) |
| Control parameters |
| 8.1. |
| SECTION 8: Exposure controls/personal protection |
No additional information available
No additional information available
| 8.2. Exposure controls |
Appropriate engineering controls:
Ensure good ventilation of the work statio
Hand protection:
In case of repeated or prolonged contact wear gloves. EN 374. Choosing the proper glove is a decision that depends not only on the type of material, but also on other quality features, which differ for each manufacturer. Please follow the instructions related to the permeability and the penetration time provided by the manufacturer. Gloves must be replaced after each use and whenever signs of wear or perforation appear. Do not use : leather, thick fabric gloves
Eye protection:
Chemical goggles
Skin and body protection:
Wear suitable protective clothing
Respiratory protection:
In case of insufficient ventilation, wear suitable respiratory equipment. EN 143. Do not breathe gas/vapour/aerosol.
Environmental exposure controls:
Avoid release to the environment.
| Information on basic physical and chemical properties |
| 9.1. |
| SECTION 9: Physical and chemical properties |
Physical state : Powder
Colour : Pure white
Odour : odourless.
Odour threshold : No data available
pH : No data available
Relative evaporation rate (butylacetate=1) : NA
Melting point : NA
Freezing point : NA
Boiling point : ˃ 650⁰C
Flash point : Not flammable
Auto-ignition temperature : No data available
Decomposition temperature : No data available
Flammability (solid, gas) : Not flammable
Vapour pressure : NA
Relative vapour density at 20 °C : NA
Relative density : 300g/m³
Explosive properties : Not explosive
Oxidising properties : No data available
Explosive limits : NA
| 9.2. Other information |
No additional information available
| SECTION 10: Stability and reactivity |
| 10.1. Reactivity |
The product is non-reactive under normal conditions of use, storage and transport.
10.2. Chemical stability
Stable under normal conditions.
10.3. Possibility of hazardous reactions
No dangerous reactions known under normal conditions of use.
| 10.4. Conditions to avoid |
| 10.6. Hazardous decomposition products |
| 10.5. Incompatible materials |
No additional information available No additional information available
Under normal conditions of storage and use, hazardous decomposition products should not be produced.
| SECTION 11: Toxicological information |
| 11.1. Information on toxicological effects |
Acute toxicity (oral) : Not classified (Lack of data)
Acute toxicity (dermal) : Not classified (Lack of data)
Acute toxicity (inhalation) : Not classified (Lack of data)
Skin corrosion/irritation : Not classified (Lack of data)
Serious eye damage/irritation : Not classified (Lack of data)
Respiratory or skin sensitisation : Not classified (Lack of data)
Germ cell mutagenicity : Not classified (Based on available data, the classification criteria are not met)
Carcinogenicity : Not classified (Based on available data, the classification criteria are not met)
Reproductive toxicity : Not classified (Lack of data)
STOT-single exposure : Not classified (No data available)
STOT-repeated exposure : Not classified (No data available)
Aspiration hazard : Not classified (Based on available data, the classification criteria are not met)
| SECTION 12: Ecological information |
| 12.1. Toxicity |
Ecology – general : No data available.
Acute aquatic toxicity : Not classified (Lack of data)
Chronic aquatic toxicity : Not classified (Lack of data)
| 12.2. Persistence and degradability | |
| Aerophane | |
| Persistence and degradability | No additional information available. |
| 12.3. Bio accumulative potential | |
| Aerophane | |
| Bio accumulative potential | No additional information available. |
| 12.4. Mobility in soil |
No additional information available No additional information available No additional information available
| 13.1. Waste treatment methods |
| SECTION 13: Disposal considerations |
| 12.6. Other adverse effects |
| 12.5. Results of PBT and vPvB assessment |
Waste treatment methods : Disposal must be done according to official regulations. European waste catalogue. Do not
dispose of with domestic waste. Do not discharge into drains or the environment.
European List of Waste (LoW) code : 08 04 16 – aqueous liquid waste containing adhesives or sealants other than those mentioned
in 08 04 15
| SECTION 14: Transport information |
In accordance with ADR / RID / IMDG / IATA / ADN
| ADR | IMDG | IATA | ADN | RID |
| 14.1. UN number | ||||
| Not applicable | Not applicable | Not applicable | Not applicable | Not applicable |
| ADR | IMDG | IATA | ADN | RID |
| 14.2. UN proper shipping name | ||||
| Not applicable | Not applicable | Not applicable | Not applicable | Not applicable |
| 14.3. Transport hazard class(es) | ||||
| Not applicable | Not applicable | Not applicable | Not applicable | Not applicable |
| 14.4. Packing group | ||||
| Not applicable | Not applicable | Not applicable | Not applicable | Not applicable |
| 14.5. Environmental hazards | ||||
| Not applicable | Not applicable | Not applicable | Not applicable | Not applicable |
| No supplementary information available | ||||
14.6. Special precautions for user
- Overland transport
Not applicable
– Transport by sea
Not applicable
– Air transport
Not applicable
– Inland waterway transport
Not applicable
– Rail transport
Not applicable
14.7. Transport in bulk according to Annex II of Marpol and the IBC Code
Not applicable
SECTION 15: Regulatory information
15.1. Safety, health and environmental regulations/legislation specific for the substance or mixture
- EU-Regulations
Contains no REACH substances with Annex XVII restrictions Contains no substance on the REACH candidate list Contains no REACH Annex XIV substances
15.1.2. National regulations
No additional information available
15.2. Chemical safety assessment
No chemical safety assessment has been carried out
SECTION 16: Other information
Indication of changes:
| Section | Changed item | Change | Comments |
| 2.1 | Classification according to Directive 67/548/EEC [DSD] or 1999/45/EC [DPD] | Removed | |
| 2.2 | Classification according to Directive 67/548/EEC [DSD] or 1999/45/EC [DPD] | Removed |
Abbreviations and acronyms:
| ADN | European Agreement concerning the International Carriage of Dangerous Goods by Inland Waterways |
| ADR | European Agreement concerning the International Carriage of Dangerous Goods by Road |
| ATE | Acute Toxicity Estimate |
| BCF | Bio concentration factor |
| CLP | Classification Labelling Packaging Regulation; Regulation (EC) No 1272/2008 |
| DMEL | Derived Minimal Effect level |
| DNEL | Derived-No Effect Level |
| DPD | Dangerous Preparations Directive 1999/45/EC |
|
Data sources : Information
provided by the manufacturer.
KFT SDS EU 01
This information is based on our current knowledge and is intended to describe the product for the purposes of health, safety and environmental requirements only. It should not therefore be constr